Antimicrobial irrigation solution for wound cleansing,
moisturisation and care

It accelerates the healing of wounds and burns

Class III Medical Device
Actolind-w-Solution-EN[1]
Actolind-w-Solution-EN-50ml[1]
Actolind-w-Solution-EN-100ml[1]
Actolind-w-Solution-EN-250ml[1]
Actolind-w-Solution-EN-350ml[1]
Actolind-w-Solution-EN-500ml[1]
Actolind-w-Solution-EN-1L[1]
Anterior
Siguiente

50 ml

Buy

50 ml

Buy

100 ml

Buy

250 ml

Buy

350 ml

Buy

500 ml

Buy

1000 ml

Buy

Effective

Cleanses and protects the wound and the peri-wound
• Optimised wetting effect detaches impurities more effectively
• Removes contaminants, scabs, necrotic tissues and biofilm layers from wounds effectively by decreasing the surface tension
• Forms a thin protective film layer on the applied area
• Fills the wound bed and remains on the applied area, leaving no free space for pathogens to colonise
• Provides continuous moisturisation and infection protection
• Minimises the growth of microorganisms at the interface between the wound and the dressing

Dermatologically tested

Neither irritating nor painful
• Mucous membrane compatible
• Does not cause sensitization

Healing

Provides moisture and care
• Keeps the wound surface clean and moist
• Optimized wetting and moisturising effect for dry wounds
• Enhances the effectiveness of the dressing
• Prevents the adhesion of microorganisms
• Accelerates the healing of wounds and burns

Patient-friendly

Convenient and painless dressing changes
• Softens encrusted dressing materials that are dried and adhered to the wound
• Forms a barrier between the wound surface and the dressing
• Fills the space between the wound surface and the dressing
• Minimizes adhesion of dressings to the wound surface
• Allows atraumatic change of dressing materials

Gentle

High biocompatibility
• Neither inhibits granulation nor epithelialization
• High tissue compatibility
• Suitable for long-term treatment
• Well tolerated by allergic and diabetic patients

Protective

Provides antimicrobial cleansing and protection
• Prevents the colonization of pathogens
• Prevents possible re-infections
• Prevents the formation of biofilms
• Highly effective against multi-resistant organisms (MRSA, VRE) and mycotic pathogens (C. albicans)

Supportive

Efficient wound care thanks to the synergistic effect of poloxamer and polyhexanide (PHMB)

Properties

Actolind® w Solution is a cleansing, irrigation, decontamination, moistening and care solution used together with materials such as bandages, dressings, pads and wound fillers for acute, chronic and infected wounds as well as 1st and 2nd degree burns.

Actolind® w Solution cleans wounds mechanically. Surface active agents in its composition provide a convenient and painless cleaning needed before wound care by decreasing the surface tension. Actolind® w Solution contributes to the wound healing process by ensuring a highly positive cleansing and moisturizing effect on applied areas.

Actolind® w Solution is effective against multidrug-resistant (e. g. MRSA, VRE) and mycotic pathogens. It is also well tolerated by allergics and diabetics.

This product is a Class III Medical Device according to the Medical Device Directive 93/42/EEC

Chemical composition

Poloxamer, Polyhexamethylene biguanide (Polyhexanide, 0.1%) purified water

Indications:

  • Infected or uninfected acute wounds (e.g. traumatic wounds that occur as the result of cuts, tears, excoriation, crushing, being bitten, being stung or surgical wounds)
  • Infected or uninfected chronic wounds (diabetic ulcers, venous ulcers, decubitus (pressure sore), etc.)
  • Infected or uninfected thermal or chemical wounds (1st and 2nd degree burns, chemical burns, wounds that caused by electrical current, radiation wounds etc.)
  • Entry regions of urological catheters,
  • Maintenance of peristomal skin, fistulas and abscesses, wound surface prior to dressing, suitable for antiseptic cleansing, softening and removal of dressing materials, bandages, dressings, pads and wound fillers that are dried, contaminated and adhered to the wound

Method of Use:

Actolind® w Solution should be used for wound surface cleaning and irrigation before any treatment.

Actolind® w Solution can be applied in combination with Actolind® w Gel. The wound should be cleaned with Actolind® w Solution before the application of Actolind® w Gel to remove any contaminants and deposits.

Actolind® w Solution can also be used for antiseptic cleansing and softening of encrusted dressing materials that are dried and adhered to the wound surface and difficult to remove.

Actolind® w Solution does not inhibit granulation or epithelialization. It has neither irritating nor pain giving properties. It causes no sensitization and can be used safely for a long time.

Usage:

Actolind® w Solution can be applied directly onto the wound as well as onto the bandage and gauzes.

The entire wound and its surroundings should be thoroughly cleaned with Actolind® w Solution. For optimal wound cleaning, it is recommended to wet the wound consisting of deep and intensively necrotic tissues, for at least 10-15 min. with the help of a fully wetted compress (application of wet dressing). The application can be repeated according to the wound conditions without any time limits. Do not dilute the solution! The cleaned wound can be covered with Actolind® w Gel and bandaged properly.

Thoroughly wet dressings and bandages adhered to the wound surface with Actolind® w Solution, wait 5-10 min. For softening and remove them carefully from wound. Wetting the dressing materials with Actolind® w Solution prevents adhering to the wound surface and facilitates dressing change significantly. In order to maintain a moist wound climate, the dressing can be changed daily, if necessary, several times a day. Actolind® w Solution is compatible with all modern wound dressings.

Possible infections can be avoided by regular cleaning catheter inlet ports, flexible connectors and its environment by Actolind® w Solution. Spray Actolind® w Solution on the area from a short distance and wait 1-5 min. The ingredients of Actolind® w Solution are particularly mucous membranefriendly, cleanse catheter and PEG material without damaging it. As with wound care, encrusted sticking plasters can be removed easily after wetting with Actolind® w Solution.

 Actolind® w Solution can be heated to body temperature prior to use.

 

Do not use Actolind® w Solution in the following cases:

  1. In hyaline cartilage and aseptic joint surgeries, in the middle and internal ear and in the eye (If Actolind® w Solution contacts the aseptic cartilage, wash immediately with Ringer solution or physiological saline solution)
  2. In case of hypersensitive to any of the ingredients
  3. On central nervous system or meninx
  4. Along with anionic surfactants, cleansing soaps, creams, oils, enzymes, etc. (These substances should be removed fully from the wound surface before use)
  5. Peritoneal lavage and washing

Packaging

Article-No. Unit Packaging Unit Packaging Type PZN
06.6703.05 10 x 5 ml Strip 72 Monodose Strip 16889754
06.6703.10 5 x 10 ml Strip 72 Monodose Strip 16684727
06.6703.50 50 ml 90 Bottle with spray cap 10985385
06.6703.100 100 ml 72 Bottle with spray cap 10985391
06.6703.250 250 ml 42 Bottle with spray cap 10985416
06.6703.350 350 ml 30 Bottle 16684733
06.6703.500 500 ml 30 Bottle 10985422
06.6703.1 1000 ml 10 Bottle 10985439

Downloads

Product Videos​